Set wheels and axles optimally With Tire Care

For a car to actually drive straight ahead and stay in the “lane”, wheels must always be as vertical as possible when driving. For new vehicles, these are precisely set in the factory with a wheel alignment. With correctly aligned axle geometry, your car is back in the right lane. The road-holding improves, and the safety of the vehicle occupants is increased. At the Walmart tire centers you can have the best deal.

For laymen, it is difficult to judge whether wheels and axles are optimally aligned on the vehicle. And if you notice irregularities in the tire’s wear after driving through a pothole, you should consult a specialist. Incorrect tracking endangers driving safety and increases tire wear.

Avoid curb bumps

In general, car drivers should be careful to avoid curbs or similar damage to the tire. This also contributes to optimum tire care. Both the outer wall of the tire and the supporting frame of the tire, the carcass, can be damaged by inappropriate contact with the curb. Small cracks can quickly spread to irreparable damage. You should be careful to check the sidewalls of the tires regularly. Scratches and bumps should be inspected immediately by a specialist. This will prevent unnecessary tire wear and increase your life.

Check tire valves

Checking the valves and valve caps is also part of tire care. These are made of rubber and wear off over the years, which can lead to a pressure loss of the tires. It is recommended to use valves such as B. snap-in valves for snapping, inexpensive to replace the purchase of new tires or to replace when changing tires. This ensures more safety for you and your tires. Valves and valve caps, which are in good condition, guarantee airtightness, can maintain the correct air pressure and thus ensure longer life of the tires.

Always install suitable valve caps to prevent contamination of the valve core and subsequent loss of air. Do not apply extra weight to the valve mouth or to the valve cap, and for valves with a seal, replace the seal each time the tire changes. Always make sure that the valve body is tightened with the correct torque (torque value: please follow the manufacturer’s recommendations) and that the sealing ring is pressed on. For speeds over 210 km / h, use either metal screw-in valves or valve supports to limit valve deflection.

Store tires correctly

After changing the summer and winter tires, vehicle owners should always store unused tires in cool, dry and dark places and store them properly.

For proper tire care, wheels should never be stacked over a long period of time. To protect the tires, you can put Styrofoam plates in between. Also, a distance to chemicals, solvents and hydrocarbons should be kept. Likewise, open flames, glowing objects, oil, grease and material with potential electrical discharges should be avoided.

Uneven wear of tires

Tire wear can occur due to very different types of uneven wear. The most typical types are stage, one-sided or central wear as well as blocking points.